- Water based
- Non toxic
- Free of voc’s
- Free of flammable solvents
- Easy to apply
- Multiple uses
- Super adhesive
- Can be applied to almost any surface
Aqualoc – Roller/Brush Grade is made from a highly modified asphalt emulsion. Aqualoc – Roller/Brush Grade is a cold applied liquid rubber membrane, single component system that can be used for a multitude of applications.
Aqualoc – Roller/Brush Grade has numerous applications such as Gravel Roofing, Vents, HVAC Units, Roofing Repairs, Corrosion and Rust Protection, Waterproofing and Concrete Protection (basement walls, foundations and more), Trailers, RV’s and Automotive under coatings, Ponds and Planter Boxes, etc.
- Easy to apply
- Minimal surface preparation
- Environmentally friendly
- High puncture resistance
- Seamless – No laps
- Fully bonds to all substrates
- Does not allow tracking
- Ozone and UV resistant
- Can withstand thermal cycling
- Super Adhesive
- Minimal Shrinkage
- DIY Protection
Aqualoc – Roller/Brush Grade should not be applied when ambient temperature is below 45ºF/7.2°C. Do not apply in the rain or if rain is imminent. Make sure surface is dry and clean of dirt, oil, grease or any debris. Do not store in direct sunlight. Product should be allowed to cure before re-coating. Shelf life is minimum 9 months in tightly sealed containers. Uncured product is subject to damage if frozen. Do not apply to wet or frosted surfaces.
Aqualoc – Roller/Brush Grade can be applied with a brush or roller it can be sprayed. Mix product slowly, before and during application. Product will fully cure in 24 hours at 70°F (21°C) 50% relative humidity. Apply liberally, approx. 30 sq ft per gallon, allow first coat to dry/cure before re-applying. Curing time is affected by relative humidity and temperature. Product turns from brown (wet) to black (dry). Please call Aqualoc Corporation for correct application methods and procedures. Mechanically mix.
When applying, wear gloves, eye protection and other suitable personal protective equipment. Stored product will be damaged if allowed to freeze. Consult the MSDS for further information.
THIS PRODUCT IS NOT SUBJECT TO THE CONTROLLED PRODUCTS REGULATIONS