BENEFITS

  • RV roofing and exterior walls
  • Tip-outs, awnings
  • Fast drying, breathable
  • Resists blistering
  • Odourless, non toxic, no voc’s

  • Resists mild ponding
  • Water based elastomeric
  • Easily applied
  • Can be tinted

Additional Info

DESCRIPTION

Aqualoc – RV-PRO is a water-based elastomeric coating specifically designed to achieve optimum adhesion over new or existing vinyl, EPDM, aluminum and canvas roof substrates. In combination with an application of Aqualoc – Roller Brush, it effectively extends the life of the roof. It provides a waterproof barrier with excellent resistance to blistering under mild ponded water exposure, while providing a cooler, reflective roof system. RV-PRO has approximately 5 times the adhesion of typical elastomeric acrylic coatings over all existing RV roof systems.

USAGE

RV-PRO was developed to extend the life of trailer roofs, Add-A-Rooms, mobile homes, tip-outs, awnings and canvas pop-up trailers. Once coated the substrate is protected from further degradation caused by normal weather, aging and short term ponded water conditions for up to 8-10 years, leaving all areas of application untouched by the elements.

LIMITATIONS

RV-PRO should not be applied when ambient temperature is below 45°F (7.3°C). Uncured product is subject to damage if frozen. Do not apply to wet surfaces. Do not apply in the rain or if rain is imminent. Make sure surface is dry and clean of dirt, oil, grease or any loose or foreign debris. Do not store in direct sunlight. Shelf life is one year in tightly sealed containers. If storing for long periods product will settle into a two-stage suspension. Use a mixer to blend entire pail. Do Not Freeze.

APPLICATION

RV-PRO is a single-component, ready–to-use material which can be applied using a brush, roller or airless sprayer. Do not thin or reduce the product. All surfaces must be clean and dry, free of any dirt, dust, oil, surface chemicals or other contaminants that may interfere with the application. Brush or roller should be used for touch-up and edge work. Use a pump with a minimum 3.8 litre/minute output and 2000 psi pressure capability. Use a reversible self-cleaning tip with an orifice size of .69 to .99mm.

CAUTION

When applying, wear gloves, eye protection and other suitable personal protective equipment. Mask off areas of concern to prevent over spray issues. Consult MSDS for further information.

** NOTE: Aqualoc – RV-PRO+ comes with hollow-core ceramic micro-spheres providing an increased R-Value to your RV or Motor Home.

THIS PRODUCT IS NOT SUBJECT TO THE CONTROLLED PRODUCTS REGULATIONS

Datasheets

AQ RV Pro