Aqualoc Trowel Grade

DESCRIPTION

Aqualoc – Trowel Grade is a safe and environmentally friendly alternative to conventional trowel, caulking tubes or other solvent based alternatives.

USAGE

Aqualoc – Trowel Grade ideal for numerous applications such as Roofing Repairs, Corrosion and Rust Protection, Waterproofing and Concrete Protection cracks, bug holes on slabs, basement walls, foundations and more, Automotive (under coatings) patch repairs, Trailers, RV’s, Ponds and Planter Boxes, Boat Patch repair, etc.

ADVANTAGES

• One coat system
• Minimal surface preparation
• Environmentally friendly
• Thick consistency
• Fully bonds to all substrates
• Minimal shrinkage
• Ozone and UV resistant
• Can withstand thermal cycling
• Super Adhesive
• Great prep product for the Aqualoc spray applied membrane
• DIY Protection

LIMITATIONS

Aqualoc – Trowel Grade should not be applied when ambient temperature is below 45°F (7.3°C). Uncured product is subject to damage if frozen. Do not apply to wet or frosted surfaces. Do not apply in the rain or if rain is imminent. Make sure surface is dry and clean of dirt, oil, grease or any debris. Do not store in direct sunlight. Product should be allowed to cure before recoating. Shelf life is 9 months in tightly sealed containers.

APPLICATION

Aqualoc – Trowel Grade can be applied with a brush, roller or trowel. Mix product slowly, before and during application. Product will fully cure in 24 hours at 70°F (21°C) 50% relative humidity. Apply liberally and allow first coat to dry before re-applying. Curing time is affected by relative humidity and temperature. Mechanically mix to desired thickness. Product turns from brown (wet) to black (dry). Please call Aqualoc Corporation for application methods and procedures.

CAUTION

When applying, wear gloves, eye protection and other suitable personal protective equipment. Consult the MSDS for further information.