Rubber Applications and Geo Fabric

EPDM Roof Repairs

Aqualoc Rubber Systems and Geo fabric and Roof Coat as a release agent. Seams coming apart on the EPDM roofing system corners on sky lights failing past its prime.

Roof Coat

WATERPROOF COATING

USES

Consult with AquaLoc staff for specific application instructions when applying all Aqualoc Rubber Systems. Roofing Shingles • Cedar/Wood • Rubber Membranes • Concrete/Clay Fired Tiles • Primed Metal • Provides Energy Efficient System

General Instructions

Aqualoc – Roof Coat can be applied using a roller, a brush or an approved “paint” sprayer. Ensure surface is dry and free of all foreign matter. Mixing: Product mixes best slowly with mechanical mixer. Dry/Recoat: Curing occurs within 24 hrs should be dry to the touch before re-applying. All times are dependent on depth of application, ambient temperatures and humidity. Precautions: Standard protective and safety precautions apply. Do not apply when rain is imminent (24hrs). Do not allow product to freeze. Clean-Up: Soap and water. Storage/Transportation: This product is non-flammable and does not present storage or transportation hazards. Must be kept in warm, dry atmosphere. Unused product must be closely sealed to prevent skimming.

Consult the MSDS for further information.

Ceramic TopCoat

ENERGY EFFICIENT WATERPROOF COATING

USES

Consult with AquaLoc staff for specific application instructions when applying all Aqualoc Rubber Systems. Roofing Shingles • Cedar/Wood • Sheet Rubber Membranes • Concrete/Clay Fired Tiles • Primed Metal • Provides Energy Efficient System

General Instructions

Aqualoc – Ceramic Topcoat can be applied using a roller, a brush or an approved “paint” sprayer. Ensure surface is dry and free of all foreign matter. Mixing: Product mixes best slowly with mechanical mixer. Dry/Recoat: Curing occurs within 24 hrs should be dry to the touch before re-applying. All times are dependent on depth of application, ambient temperatures and humidity. Precautions: Standard protective and safety precautions apply. Do not apply when rain is imminent (24hrs). Do not allow product to freeze. Clean-Up: Soap and water. Storage/Transportation: This product is non-flammable and does not present storage or transportation hazards. Must be kept in warm, dry atmosphere. Unused product must be closely sealed to prevent skimming.

Consult the MSDS for further information.

Below Grade/Damp Proofing

COLD SPRAY APPLIED, INSTANT SET, RUBBER MEMBRANE

USES

Consult with AquaLoc staff for specific application instructions when applying all Aqualoc Rubber Systems. Damp proofing, waterproofing membrane for concrete protection between slabs, basement walls, foundations, bridge decks and more; planter boxes, concrete tanks for primary and secondary containment.

General Instructions

Aqualoc – Below Grade is a spray applied instant setting membrane. Mixing: Mechanically; Mix thoroughly for minimum of 15-20 minutes. When applying, start at the lowest point moving to the highest point after all prep work is completed. Apply at the specified thickness. Allow for a full cure before applying Aqualoc – TopCoat. Consult the MSDS for further information. Clean-up and Storage Instructions: AquaLoc – Below Grade is a non flammable liquid and does not present storage or transportation hazards. The product MUST be kept in heated storage if there is any danger of outside temperatures reaching below 40°F (5°C). For clean-up use baby oil or mineral spirits. Product can be kept for up to one year. Stir monthly during storage periods.

Consult the MSDS for further information.

Trowel Grade

HAND APPLIED WATERPROOF COATING

USES

Consult with AquaLoc staff for specific application instructions when applying all Aqualoc Rubber Systems. Wherever waterproofing or corrosion protection is required.

General Instructions

Aqualoc – Trowel Grade can be applied using a roller, a brush or an approved “paint” sprayer. Ensure surface is dry and free of all foreign matter. Mixing: Mechanically mix product before using. Dry/Recoat: Curing occurs within 24 hrs. Should be dry to the touch before re-applying. All times are dependent on depth of application, ambient temperatures and humidity. Precautions: Standard protective and safety precautions apply. Do not apply when rain is imminent (24hrs). Do not allow product to freeze. Clean-up: Mineral spirits or baby oil. Storage/Transportation: This product is non-flammable and does not present storage or transportation hazards. Must be kept in warm, dry atmosphere. Unused product must be closely sealed to prevent skimming.

Consult the MSDS for further information.

Pour & Seal

COLD APPLIED, TROWELABLE, SINGLE COMPONENT

USES

Consult with AquaLoc staff for specific application instructions when applying all Aqualoc Rubber Systems. Whenever waterproofing or roofing protection is required.

General Instructions

Aqualoc – Pour & Seal can be applied using a roller, squeegee or mop. Clear gravel area or work Aqualoc – Pour & Seal into gravel with a rake. Ensure surface is dry and free of all foreign matter. Mixing: Mechanically mix product before using. Dry/Recoat: Curing occurs within 24 hrs. Should be dry to the touch before re-applying. All times are dependent on depth of application, ambient temperatures and humidity. Precautions: Standard protective and safety precautions apply. Do not apply when rain is imminent (24hrs). Do not allow product to freeze. Clean-up: Mineral spirits or baby oil. Storage/Transportation: This product is non-flammable and does not present storage or transportation hazards. Must be kept in warm, dry atmosphere. Unused product must be closely sealed to prevent skimming.

Consult the MSDS for further information.

Roller/Brush Grade

HAND APPLIED WATERPROOF COATING

USES

Consult with AquaLoc staff for specific application instructions when applying all Aqualoc Rubber Systems. Wherever waterproofing or corrosion protection is required.

General Instructions

Aqualoc – Roller/Brush Grade can be applied using a roller, brush or a squeegee. Ensure surface is dry and free of all foreign matter. Mixing: Mechanically stir product before using. Dry/Recoat: Curing occurs within 24 hrs. Should be dry to the touch before re-applying. All times are dependent on depth of application, ambient temperatures and humidity. Precautions: Standard protective and safety precautions apply. Do not apply when rain is imminent (24hrs). Do not allow product to freeze. Clean-up: Mineral spirits or baby oil. Storage/Transportation: This product is non-flammable and does not present storage or transportation hazards. Must be kept in warm, dry atmosphere. Unused product must be closely sealed to prevent skimming.

Consult the MSDS for further information.